Two blue sapphires can look alike across a counter and differ ten times over in price. The answer is almost always treatment, and whether anybody mentioned it.
In short
Blue Sapphire (Neelam) is Corundum (aluminium oxide), 9 on the Mohs scale. Most blue sapphire on the market is treated in some way, which is normal trade — what matters is whether you were told, because an untreated stone and a treated one can differ many times over in price and look identical.

Natural Blue Sapphire, 4.25 ratti, the gemstone of Saturn in Vedic astrology.
₹28,999.00
Not in stock just now
View this pieceAnybody buying Blue Sapphire for the first time runs into the same wall. Two stones look alike, one costs ten times the other, and neither listing explains why. The answer is almost always treatment — what was done to the stone after it came out of the ground, and whether anybody mentioned it.
This page covers what Blue Sapphire actually is, every treatment it commonly undergoes and what each does to the price, what gets sold in its place, what a laboratory report will and will not tell you, and how to look after it. Where something rests on tradition rather than on anything checkable, it is marked as such.
What Blue Sapphire is
Blue Sapphire, known in India as Neelam, is Corundum (aluminium oxide). Its colour comes from iron and titanium. On the Mohs scale of hardness it sits at 9, which decides more about living with the stone than anything else does: how it should be cleaned, whether it can be worn daily, and what will damage it.
It is found in Sri Lanka, Madagascar, Myanmar, Kashmir (historically), Australia, Thailand. Where a stone came from affects its price in some varieties a great deal, and origin is a specialist laboratory determination rather than something a seller can simply assert.
Corundum
what it is
Mohs 9
hardness
Iron and titanium
gives the colour
Sri Lanka
among its sources
Treatment: the thing that decides the price
This is the section to read if you read nothing else. Most coloured stone sold anywhere in the world has been treated, and that is not a scandal — it is ordinary trade, practised openly, and much of it is stable and accepted. The problem is never that a stone was treated. It is that the buyer was not told.
Two blue sapphires can look identical across a counter and differ many times over in price on treatment alone. Here is what is done to blue sapphire, and what each does.
Heat treatment
Very common and accepted. Deepens colour and clears silk. Stable, and must be disclosed — unheated stones command a large premium.
Beryllium diffusion
Beryllium driven into the stone at high temperature to change its colour. Permanent, but the colour is only skin-deep in some stones, and the price should be a fraction of an untreated equivalent. Detectable only by laboratory analysis.
Fracture filling
Less common than in ruby but it happens.
What gets sold as Blue Sapphire
Synthetic sapphire
Identical chemistry, laboratory-grown, extremely cheap. The most common substitution in this stone.
Blue spinel, iolite, tanzanite
Natural stones sold as sapphire. All softer and all distinguishable by a laboratory.
Glass and doublets
At the very low end.
Kashmir origin is claimed far more often than Kashmir material exists. Origin claims on sapphire are worth nothing without a report from a laboratory that does origin determination, and that is a specialist service.
The four things that decide quality
The trade judges coloured stone on four things, and they are not equally important however often they are listed in the same breath.
Colour
The largest factor by a long way among untreated stones. It has three parts: hue (the colour itself), tone (how light or dark) and saturation (how strong). Saturation is what people are really responding to when they say a stone has life. A dark stone and a pale one can both be poor for opposite reasons, and the range in between is where nearly all the price sits.
Colour is also the thing photographs lie about most. Ask for pictures in daylight and under ordinary indoor light, because some stones look quite different under each, and a seller who only ever shows one lighting condition is showing you the flattering one.
Clarity
Clarity is judged by the standard for this stone, not by a general one. That matters here: blue sapphire is judged against what is normal for its own kind rather than against a general standard. Applying a diamond's clarity expectations to a coloured stone leads people to reject good material and buy treated material instead.
Cut
The least discussed and the most underrated. Cut decides how much of the colour you actually see: a well-cut stone returns light evenly across the face, a poorly cut one has a dead window in the middle where light passes straight through. Hold it over printed text — if you can read the words through the middle of the stone, it is windowed, and it will always look flatter than its colour grade suggests.
Carat weight
Quoted first almost everywhere and mattering least of the four. Price per carat rises with size rather than staying flat, so a two-carat stone costs a good deal more than twice a one-carat of the same quality — but a larger stone of poorer colour is worth less than a smaller fine one, whatever the weight says.
Buying, in order
Working through it in this sequence avoids nearly every way this goes wrong.
Decide treated or not
This sets the price bracket before anything else
Set a budget for that bracket
The two barely overlap
Find sellers who disclose
In writing, or cross them off
Compare on colour
Not on weight, which is what listings lead with
- Decide whether you are buying treated or untreated. This sets the price bracket before anything else does, and the two barely overlap.
- Set a budget for that bracket rather than for the stone generally.
- Find sellers who will state every treatment in writing. Cross off anyone who will not.
- Ask for photographs of the actual stone in two lighting conditions.
- Ask for the report, and check its number on the laboratory’s own website.
- Compare on colour first, cut second, clarity third, weight last.
- Check the return terms before paying, not after.
Origin, and what it is worth
Blue Sapphire comes from Sri Lanka, Madagascar, Myanmar, Kashmir (historically), Australia, Thailand. For some varieties origin moves the price a great deal, and that is where a particular problem lives: origin is claimed far more often than the famous sources could possibly supply.
Origin determination is a specialist laboratory service, based on inclusion patterns and trace element chemistry, and it is not something a seller can simply assert. If origin is part of what you are paying for, the report has to say so — and it has to be a laboratory that offers origin determination, because not all of them do.
If origin is not part of what you are paying for, it is worth ignoring entirely. A fine stone from an unfashionable source is a fine stone.
If you already own one
Plenty of people arrive at this page holding a stone somebody gave them, or one they bought years ago before they knew what to ask. Having it checked is straightforward and costs far less than the stone did.
Any recognised gemmological laboratory will identify it, say whether it is natural, and name any treatment. You do not need to buy anything from anybody to have that done. If it turns out to be treated, or to be something else entirely, that is worth knowing — both for insurance and for the next time somebody offers you one.
What a laboratory report says, and what it does not
About the certificate
What it states
- ✓ What the material is
- ✓ Natural or laboratory-grown
- ✓ Any treatment detected
- ✓ Weight and measurements
What it does not
- ✕ Value the piece — a report is not a price
- ✕ Certify origin, unless it says so
- ✕ Vouch for anything the seller adds
A report identifies the material, says whether it is natural or laboratory-grown, names any treatment detected, and gives weight and measurements. That is a great deal, and for blue sapphire it is most of what decides the price.
What it does not do is value the stone. Two blue sapphires with identical reports can differ several times over on colour, cut and life, and no report will tell you that. Nor does a report vouch for anything the seller has added around it.
Before you buy
- ✓The material, namedCorundum
- ✓Natural or laboratory-grown, stated
- ✓Every treatment, named in writingNot just “natural”
- ✓Weight in carats and measurements in mm
- ✓A report number you can look up yourselfOn the laboratory's own site
- ✓Photographs of the actual stoneNot a catalogue image
- ✓The return termsBefore paying, not after
Mistakes people make
Buying on carat weight
A larger stone of poorer colour is worth less than a smaller fine one, and weight is the easiest number for a listing to lead with. It is the least useful of the four things that decide price.
Treating a certificate as a valuation
It identifies. It does not value. Those are different jobs and no laboratory does the second.
Assuming a low price means a bargain
At a low enough price the stone is something else, or it is treated in a way nobody mentioned. Both happen far more often than a genuine bargain does.
Cleaning it the wrong way
More stones are damaged by ultrasonic cleaners and hot water than by anything else. See the care section below — it is specific to this stone and it matters.
Looking after it
As hard as ruby and as durable, unless treated. Warm soapy water. Avoid ultrasonic cleaning on any stone whose treatment you do not know.
Worth remembering
Hardness 9 is the number to remember. It decides how blue sapphire should be cleaned and whether it can be worn every day.
Setting it, and wearing it
At 9 on the Mohs scale, blue sapphire takes daily wear in a ring without much thought. That is worth settling before choosing a setting, because a setting is harder to change than a mind.
A bezel — metal wrapped around the girdle — protects the edges and suits softer stones and anyone who works with their hands. Prongs show more of the stone and let more light in, which matters for colour, but they expose the edges to knocks and they loosen over time. Have prongs checked once a year; a stone lost from a loose prong is the commonest way people lose a stone.
The metal affects the apparent colour more than most people expect. Yellow gold warms a stone and white metal cools it, and the same stone can look like two different grades in the two settings. Ask to see it against both before deciding.
Where the market goes wrong
Photographs
Colour is the largest part of the price and the easiest thing to misrepresent with a camera. Saturation is routinely pushed in editing, and some stones look quite different in daylight than under shop lighting. Ask for pictures in both, and a short video, which is far harder to doctor convincingly than a still.
The word natural
It is used to mean two different things and the difference is the whole transaction. Natural can mean not laboratory-grown, and it can be implied to mean untreated. A stone can be entirely natural and heavily treated at once. Ask about both separately, because a seller answering one question is not answering the other.
Certificates from laboratories nobody has heard of
A report is worth what the laboratory behind it is worth. Some exist to produce paper rather than opinions. The test is simple: can you look the number up on their own site, and does the report name treatments as well as identifying the stone. A report that only identifies is telling you the easy half.
Round numbers
Stones cut to land exactly on a carat weight have usually been cut to hit the number rather than to show the stone. A little under a round weight often costs noticeably less for a stone that looks the same size, because the market prices the number rather than the millimetres.
What the tradition says
How it is traditionally worn
Metal, finger, day, weight, what is said, what is avoided. Specific enough to follow without writing to ask.
Who it suits
What decides the price
- Whether it is natural, and what was done to it. This outweighs everything else.
- Colour — the single largest factor among untreated stones of the same kind.
- Clarity, judged by the standard for this stone rather than by a general one.
- Cut, which decides how much of the colour you actually see.
- Weight, which matters least of the five and is quoted first most often.
- Origin, where a laboratory has determined it.

Natural Blue Sapphire, 4.25 ratti, the gemstone of Saturn in Vedic astrology.
₹28,999.00
Not in stock just now
View this pieceQuestions people ask
How do I know my blue sapphire is real?
Is a treated blue sapphire fake?
Why is one blue sapphire ten times the price of another?
Is a laboratory-grown stone worth buying?
Does a certificate tell me what it is worth?
How should I clean it?
Does carat weight decide the price?
Where should I buy blue sapphire?
Related reading
In short
Blue Sapphire is Corundum at 9 on the Mohs scale. What decides its price is whether it is natural and what was done to it — not weight, which is what listings lead with. Get the treatments named in writing and the report number checked on the laboratory’s own site, and most of the ways this goes wrong are closed off.
Traditional and astrological associations described on this page are matters of belief, not established fact. Nothing here is medical advice. Gemstones are not a treatment for any condition.